INJECTEUR GIGABIT POE-AT

SKU
POE302-MS
aucun
Injecteur PoE+ (IEEE 802.3AF) 1 x 30W PoE Gigabit - T° fonct. : 0~50°C Boîtier métal - 48VDC - Alimentation à prévoir: PS56VDC72W-EU,
INJECTEUR POE ULTRA GIGABIT

INJECTEUR POE ULTRA GIGABIT

EXTENSEUR POE 4 PORTS POE+

EXTENSEUR POE 4 PORTS POE+

Disponibilité: En stock
92,69 € 77,24 €

Overview

The IFS Gigabit Power over Ethernet Injector is a quick and easy solution that can be used when a network device does not provide the functionality as a power source equipment (PSE), such as a non-PoE switch, and yet the edge device being deployed is a PoE powered device (PD).

This module provides the ability to combine Gigabit Ethernet data and PoE on a single category cable for deployment of a PoE powered edge device up to 100m (328 ft.). This provides a cost-effective and efficient power distribution cable management solution for a PoE-centric IP network.

The 100m (328 ft.) distance is based on the EIA-568 standard and is the maximum distance between two Ethernet devices. The IFS Power over Gigabit Ethernet Injector can be deployed at any location within the 100m (328ft.) cable run; however, typically this device would be installed closer to the non-PoE device.

This device facilitates easier network planning by eliminating restrictions of edge device placement near AC power outlets and reduces the need for AC wiring and installation costs while delivering higher reliability.

Points clés

  • Conception Plug-and-play
  • Peut être utilisé avec d'autres périphériques compatibles IEEE 802.3at
  • Prend en charge 10/100/1000-TX Ethernet
  • Détection automatique des équipements 802.3at et 802.3af PoE IEEE assurant la protection contre une installation incorrecte
  • Détection de surcharge de courant
  • Indicateur LED: PoE Prêt/en utilisation
  • Peut déployer les données et PoE sur un seul câble de catégorie jusqu'à 100m à un dispositif PoE alimenté
Rédigez votre propre commentaire
Vous commentez :INJECTEUR GIGABIT POE-AT